Generated by EAGLE CAM Processor 7.1.0

Photoplotter Info File: D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.tcream.gpi

 Date              : 9/9/2015 5:59:32 PM
 Plotfile          : D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.tcream.ger
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      rectangle 0.0354inch x 0.0276inch    16
 D11      rectangle 0.0118inch x 0.0472inch    24
 D12      rectangle 0.0472inch x 0.0118inch    24
 D13      square    0.0315inch               6
 D14      rectangle 0.0276inch x 0.0354inch    40
 D15      rectangle 0.0150inch x 0.0335inch    12
 D16      rectangle 0.0335inch x 0.0150inch    12
 D17      rectangle 0.0315inch x 0.0354inch     9
 D18      rectangle 0.0354inch x 0.0315inch     9
 D19      round     0.0091inch              10
 D20      rectangle 0.0098inch x 0.0226inch     4
 D21      rectangle 0.0256inch x 0.0404inch     4
 D22      rectangle 0.0270inch x 0.0091inch    10
 D23      rectangle 0.0472inch x 0.0256inch     2
 D24      square    0.2400inch               1