Generated by EAGLE CAM Processor 7.1.0

Photoplotter Info File: D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.toplayer.gpi

 Date              : 9/9/2015 5:59:32 PM
 Plotfile          : D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.toplayer.ger
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      rectangle 0.0354inch x 0.0276inch    16
 D11      rectangle 0.0118inch x 0.0472inch    24
 D12      rectangle 0.0472inch x 0.0118inch    24
 D13      square    0.0315inch               6
 D14      rectangle 0.0315inch x 0.1024inch     3
 D15      rectangle 0.0276inch x 0.0354inch    40
 D16      square    0.0787inch              12
 D17      rectangle 0.0150inch x 0.0335inch    12
 D18      rectangle 0.0335inch x 0.0150inch    12
 D19      rectangle 0.0315inch x 0.0354inch     9
 D20      rectangle 0.0354inch x 0.0315inch     9
 D21      square    0.0600inch               1
 D22      octagon   0.0600inch               3
 D23      rectangle 0.0650inch x 0.0945inch     1
 D24      draw      0.0055inch              10
 D25      draw      0.0039inch              74
 D26      rectangle 0.0500inch x 0.0250inch     4
 D27      rectangle 0.0472inch x 0.0256inch     2
 D28      square    0.2400inch               1
 D29      draw      0.0060inch            2286
 D30      draw      0.0120inch              30
 D31      draw      0.0240inch               9
 D32      draw      0.0160inch              30
 D33      draw      0.0100inch              13
 D34      round     0.0270inch             141
 D35      draw      0.0740inch              12