| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- Generated by EAGLE CAM Processor 7.1.0
- Photoplotter Info File: D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.bottomlayer.gpi
- Date : 9/9/2015 5:59:34 PM
- Plotfile : D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.bottomlayer.ger
- Apertures : generated:
- Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch
- Parameter settings:
- Emulate Apertures : no
- Tolerance Draw + : 0.00 %
- Tolerance Draw - : 0.00 %
- Tolerance Flash + : 0.00 %
- Tolerance Flash - : 0.00 %
- Rotate : no
- Mirror : no
- Optimize : yes
- Auto fit : yes
- OffsetX : 0inch
- OffsetY : 0inch
- Plotfile Info:
- Coordinate Format : 2.4
- Coordinate Units : Inch
- Data Mode : Absolute
- Zero Suppression : None
- End Of Block : *
- Apertures used:
- Code Shape Size used
- D10 rectangle 0.0276inch x 0.0354inch 2
- D11 draw 0.0173inch 8
- D12 rectangle 0.0870inch x 0.0240inch 8
- D13 square 0.0600inch 1
- D14 octagon 0.0600inch 3
- D15 square 0.2400inch 1
- D16 draw 0.0060inch 1384
- D17 draw 0.0120inch 16
- D18 round 0.0270inch 141
- D19 draw 0.0100inch 6
- D20 draw 0.0000inch 24
- D21 draw 0.0001inch 4806
- D22 draw 0.0750inch 25
- D23 draw 0.0160inch 2
|
