| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758 |
- Generated by EAGLE CAM Processor 7.1.0
- Photoplotter Info File: D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.topsoldermask.gpi
- Date : 9/9/2015 5:59:35 PM
- Plotfile : D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.topsoldermask.ger
- Apertures : generated:
- Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch
- Parameter settings:
- Emulate Apertures : no
- Tolerance Draw + : 0.00 %
- Tolerance Draw - : 0.00 %
- Tolerance Flash + : 0.00 %
- Tolerance Flash - : 0.00 %
- Rotate : no
- Mirror : no
- Optimize : yes
- Auto fit : yes
- OffsetX : 0inch
- OffsetY : 0inch
- Plotfile Info:
- Coordinate Format : 2.4
- Coordinate Units : Inch
- Data Mode : Absolute
- Zero Suppression : None
- End Of Block : *
- Apertures used:
- Code Shape Size used
- D10 rectangle 0.0414inch x 0.0336inch 16
- D11 rectangle 0.0178inch x 0.0532inch 24
- D12 rectangle 0.0532inch x 0.0178inch 24
- D13 square 0.0375inch 6
- D14 rectangle 0.0315inch x 0.0197inch 6
- D15 rectangle 0.0157inch x 0.0630inch 3
- D16 rectangle 0.0336inch x 0.0414inch 40
- D17 square 0.0847inch 12
- D18 rectangle 0.0150inch x 0.0335inch 12
- D19 rectangle 0.0335inch x 0.0150inch 12
- D20 rectangle 0.0375inch x 0.0414inch 9
- D21 rectangle 0.0414inch x 0.0375inch 9
- D22 square 0.0660inch 1
- D23 octagon 0.0660inch 3
- D24 round 0.0138inch 10
- D25 rectangle 0.0118inch x 0.0236inch 4
- D26 rectangle 0.0669inch x 0.0965inch 1
- D27 rectangle 0.0299inch x 0.0138inch 10
- D28 rectangle 0.0560inch x 0.0310inch 4
- D29 rectangle 0.0532inch x 0.0316inch 2
- D30 square 0.2460inch 1
- D31 round 0.0330inch 141
|
