# N95-sanitize

A quick project to adapt a PCB-reflow oven to sanitize n95 masks. 70C for 30 minutes.

The bulk of the code was taken from [rocketscream](https://github.com/rocketscream/Reflow-Oven-Controller), and reduced/adapted until it fit this simplified use case.

## Attribution

Libraries used:

* Max6675 Library: [zhenek-kreker/MAX6675](https://github.com/zhenek-kreker/MAX6675)
* Display libaray: [olikraus/U8g2_Arduino](https://github.com/olikraus/U8g2_Arduino)
* PID library: [br3ttb/Arduino-PID-Library](https://github.com/br3ttb/Arduino-PID-Library)

## Schematic coming soon, board pictures below

[front](board/front.jpg)

[back + wiring](board/back.jpg)

[interface](board/active.jpg)