| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- Generated by EAGLE CAM Processor 7.1.0
- Photoplotter Info File: D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.toplayer.gpi
- Date : 9/9/2015 5:59:32 PM
- Plotfile : D:/Dropbox/Projects/Eagle/Hexacopter flight controller with flight controller/untitled-routed1-names1.toplayer.ger
- Apertures : generated:
- Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch
- Parameter settings:
- Emulate Apertures : no
- Tolerance Draw + : 0.00 %
- Tolerance Draw - : 0.00 %
- Tolerance Flash + : 0.00 %
- Tolerance Flash - : 0.00 %
- Rotate : no
- Mirror : no
- Optimize : yes
- Auto fit : yes
- OffsetX : 0inch
- OffsetY : 0inch
- Plotfile Info:
- Coordinate Format : 2.4
- Coordinate Units : Inch
- Data Mode : Absolute
- Zero Suppression : None
- End Of Block : *
- Apertures used:
- Code Shape Size used
- D10 rectangle 0.0354inch x 0.0276inch 16
- D11 rectangle 0.0118inch x 0.0472inch 24
- D12 rectangle 0.0472inch x 0.0118inch 24
- D13 square 0.0315inch 6
- D14 rectangle 0.0315inch x 0.1024inch 3
- D15 rectangle 0.0276inch x 0.0354inch 40
- D16 square 0.0787inch 12
- D17 rectangle 0.0150inch x 0.0335inch 12
- D18 rectangle 0.0335inch x 0.0150inch 12
- D19 rectangle 0.0315inch x 0.0354inch 9
- D20 rectangle 0.0354inch x 0.0315inch 9
- D21 square 0.0600inch 1
- D22 octagon 0.0600inch 3
- D23 rectangle 0.0650inch x 0.0945inch 1
- D24 draw 0.0055inch 10
- D25 draw 0.0039inch 74
- D26 rectangle 0.0500inch x 0.0250inch 4
- D27 rectangle 0.0472inch x 0.0256inch 2
- D28 square 0.2400inch 1
- D29 draw 0.0060inch 2286
- D30 draw 0.0120inch 30
- D31 draw 0.0240inch 9
- D32 draw 0.0160inch 30
- D33 draw 0.0100inch 13
- D34 round 0.0270inch 141
- D35 draw 0.0740inch 12
|
